Table Of Content
By unchecking this option, the screen will not automatically switch to the ProPILOT Assist screen. Using the data provided from the in vehicle navigation system (like curvature or road type), the vehicle can slow for an upcoming curve, junction or exit. This feature can help increase lane centering capability through even more freeway curves and can reduce the need to override or disengage the system. The future of Nissan driver assistance is almost here with the Nissan ARIYA. Nissan ARIYA uses breakthrough technologies to help you with the more demanding parts of the drive so you can arrive feeling more at ease. Cancel Instead of the off switch, there should be a button that just pauses the system, in case you get stopped behind a slower vehicle.
Nissan Altima (L 2013-2018 Owners Manual: Cruise control operations
The following are conditions in which the ICC system may be temporarily unavailable. In these instances, the ICC system may not cancel and may not be able to maintain the selected following distance from the vehicle ahead. All Nissan LEAF models have at least the conventional cruise control system, although those after 2017 have the more sophisticated adaptive cruise control in the pricier trims. 2019 and newer Nissan Armadas have standard adaptive cruise control, while the 2017 and 2018 models only have the system in the higher trims.
operation
Take advantage of this convenient feature to make your drives more enjoyable. SYSTEM MAINTENANCEThe sensor for the ICC system 1O is located on the front of the vehicle. Always consult a professional on matters that impact your safety and wellbeing. Meanwhile, pre-2007 Altimas had cruise control in most trim levels, except for the lowest-price one. Check the corresponding tables to see the relevant model years when the system became available.
Vehicle Type
The vehicle-to-vehicle distance control mode is designed to maintain a selected distance from the vehicle in front of you and can reduce the speed to match a slower vehicle ahead. The system will decelerate the vehicle as necessary and if the vehicle ahead comes to a stop, the vehicle decelerates to a standstill. However, the ICC system can only apply up to 40% of the vehicle’s total braking power. This system should only be used when traffic conditions allow vehicle speeds to remain fairly constant or when vehicle speeds change gradually. If this occurs, the ICC system will sound a warning chime and blink the system display to notify the driver to take necessary action.
CRUISE CONTROL OPERATIONS
To set cruising speed, accelerate your vehicle to the desired speed, push the SET– -switch OC, and release it. The ICC system set indicator (green), the vehicle ahead detection indicator, the set distance indicator and set vehicle speed indicator OB will come on. The driver sets the desired vehicle speed based on the road conditions. The ICC system maintains the set vehicle speed, similar to standard cruise control, as long as no vehicle is detected in the lane ahead. The 2022 Nissan Altima provides a practical and easy-to-use cruise control technology that improves the comfort of long-distance driving. Cruise control encourages calm driving on motorways and highways by enabling drivers to establish and maintain a chosen pace without constantly depressing the accelerator pedal.
ProPilot Assist 2.0 Compatible Roads
The detection range of the sensor is approximately 650 ft (200 m) ahead. If the vehicle ahead changes lanes or exits the freeway, the ICC system will accelerate and maintain the speed up to the set speed. Pay attention to the driving operation to maintain control of the vehicle as it accelerates to the set speed. The vehicle may not maintain the set speed on winding or hilly roads. If this occurs, you will have to manually control the vehicle’s speed.
Nissan ProPilot Assist first drive: Self-driving tech moves into the mainstream - Autoweek
Nissan ProPilot Assist first drive: Self-driving tech moves into the mainstream.
Posted: Mon, 24 Jul 2017 07:00:00 GMT [source]
The system will cancel and a warning chime will sound if the speed is below approximately 15 mph (24 km/h) and a vehicle is not detected ahead. The system will also disengage when the vehicle goes above the maximum set speed. The ICC system is designed to automatically check the sensor’s operation within the limitations of the system.
Nissan ARIYA EVOLVE+ e-4ORCE AWDEstimated Range: Up to 272 Miles*
Action to takeWhen the conditions listed above are no longer present, turn the system off using the ICC switch. VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE SWITCHESThe system is operated by the ICC switch and four control switches, all mounted on the steering wheel. From 2003 to 2017, the midsize Nissan Murano had cruise control as a standard provision. Adaptive cruise control has been available in Nissan Rogue’s higher trims since 2018. Nissan Kicks from 2018 to 2020 had the conventional cruise control.
Yes, maintaining a constant speed with cruise control can contribute to improved fuel efficiency by reducing fluctuations in speed and throttle input. CONVENTIONAL (fixed speed) CRUISE CONTROL MODEThis mode allows driving at a speed above 25 mph (40 km/h) without keeping your foot on the accelerator pedal. From 2001 to 2016, all Nissan Pathfinders have standard cruise control. Find out which roads are ProPilot Assist 2.0 compatible by checking out our high-definition marked road map.
Most models either feature additional buttons or let the driver temporarily press the accelerator pedal while in cruise control. In this guide, we will walk you through the step-by-step process of setting cruise control on a Nissan Altima, providing you with the necessary knowledge to enhance your driving experience. Setting cruise control on this vehicle is a simple and straightforward process that can help you maintain a steady speed on the road. Whether you are embarking on a long highway trip or simply navigating through city traffic, cruise control can help reduce driver fatigue and contribute to better fuel economy.
When passing another vehicle, the set speed indicator OA will flash when the vehicle speed exceeds the set speed. The vehicle detect indicator will turn off when the area ahead of the vehicle is open. When the pedal is released, the vehicle will return to the previously set speed. Even though your vehicle speed is set in the ICC system, you can depress the accelerator pedal when it is necessary to accelerate your vehicle rapidly. Vehicle-to-vehicle distance control mode display and indicators The display is located between the speedometer and the tachometer. The ICC system does not control vehicle speed or warn you when you approach stationary and slow-moving vehicles.
Action to takeIf the warning message appears, stop the vehicle in a safe place, place the shift lever in the P (Park) position, and turn the engine off. When the radar signal is temporarily interrupted, clean the sensor area of the front bumper and restart the engine. If the “Forward Driving Aids temporarily disabled Front Sensor blocked See Owner’s Manual” warning message continues to be displayed, have the system checked. Action to takeWhen the conditions listed above are no longer present, the warning message will no longer be available in the vehicle information display and the system will operate normally.
No comments:
Post a Comment